The Mobile page lets you enter configuration information for drivers who are equipped with the Verizon Connect® WorkPlan™ mobile application. This information must be entered before you can take advantage of hours of service reports or mobile messaging. All or some of the following driver mobile options might be available, depending upon your account configuration.
Note that many of the features below include the option "Use Account Default (Default Value)"; for example, Use Account Default (English - US). This option selects the global default value configured for that setting by the account administrator (specified by clicking the signed-in account name in the upper right corner of the platform interface to open the settings menu, clicking Settings, then selecting the Mobile Defaults tab).
If the global value is changed at any time, the individual driver accounts that use these default values are updated to reflect this new setting when the drivers sign in again.
Note
If your account includes support for the Hierarchy, mobile settings for drivers who have been assigned to a vehicle can also be configured from the Hierarchy interface. Select the node that contains the driver, choose the Drivers tab from the right panel, highlight the driver in the list and click Edit.The Edit Driver dialog box opens, allowing you to edit their account settings.
Note
If the "driver" you are editing is actually a mechanic, you also need to assign the driver a tag with the name "mechanic" and ensure that the driver's base location (on the details page) is the same as the base location for the vehicles this mechanic is servicing.
Language |
Change the default application language. Open to display a list of available languages. |
Country |
Change the default country. Open to display a list of available countries. |
GPS Tracking |
Specify whether location tracking using the mobile web device (for example, smart phone or tablet) is on or off. Turn this setting off, if the mobile user is using WorkPlan as an ELD, or if the vehicle is equipped with a tracking hardware unit, so that the GPS points do not interfere with the points saved from the hardware unit. |
Show Vehicle Selection At Login |
Specify if drivers will be asked to select a vehicle immediately after signing in to their device, if not already assigned. If set to "Off", the Show Vehicle Selection On Home Screen option should be turned "On". |
Show Vehicle Selection On Home Screen |
Specify if the Vehicle button will be shown on the home screen, allowing drivers to unassign themselves from their current vehicle or switch their assigned vehicle to another vehicle. If set to "Off", the Show Vehicle Selection At Login option should be set to "On". |
Must Unassign Vehicle At Logout |
Specify if the currently-assigned vehicle is automatically unassigned from the driver when signing out. When set to "Off", the vehicle is not unassigned, which is useful when drivers use features that do not involve driving or Job-related activities, such as reviewing scores in Verizon Connect® Coach™. |
Jobs |
Specify whether Jobs are enabled or disabled in the application for this driver. When enabled, the Jobs menu option is available from the Home screen. |
Driver Initiated Status |
Specify if the status of a job is updated when a driver marks a job as Complete. When set to "On", drivers need to mark a job as Complete for the job's status to be updated. When set to "Off", jobs are automatically set to Complete when the Jobs Monitor detects that the driver's assigned vehicle has left the job. |
Can User Reject Jobs |
Specify whether this driver can manually reject jobs or not. |
Forms |
Specify whether Forms are enabled or disabled in the application for this driver. When enabled, the Forms menu option is available from the Home screen |
HOS |
Enable or disable federal hours of service support for this driver. When set to "On", the HOS menu option is available from the Home screen. |
Rule Type |
Specify the default rules that should be used for checking for Hours of Service violations by this driver. These can be Federal US rules, rules set by a specific US state, or Canadian rules. |
Enable Co-Driver |
Enable or disable support for a co-driver. |
HOS Oilfield |
Enable or disable the option to indicate that the vehicle is at an oilfield for this driver. When set to "On" and a vehicle is at an oilfield, an additional HOS status, "Waiting", can be set. |
HOS Warnings |
Enable or disable a pop-up warning that opens when remaining in the current status would cause an Hours of Service violation for this driver. This warning allows the driver to change status to avoid violations |
Status Notes |
Enable or disable the ability to add notes when changing driver status. |
Edit Events |
Enable or disable the ability to edit events in the Hours of Service graph (see the Verizon Connect® WorkPlan™ help file for more information). |
HOS Alert Prior to Violation |
Configure the warning that opens if remaining in the current status would cause an HOS violation to occur for this driver (see the "HOS Warnings" section of the Verizon Connect® WorkPlan™ help). Use this control to select how much time before the violation occurs the warning should be displayed. Available range is 5 minutes to 180 minutes. |
Show Time Remaining on Status Change |
Enable or disable a warning popup that opens when an HOS status is changed, indicating the time remaining in the new status before a violation occurs. |
Login Status Change |
(Applicable to HOS v2.x users only) Specify if the driver's status is automatically set to On Duty when the driver first logs in. When set to "Off", signing in has no effect on the driver's status (it remains on the last status that was set). |
Logout Status Change |
(Applicable to HOS v2.x users only) Specify if the driver's status is automatically set to Off Duty when the driver logs out. When set to "Off", signing out has no effect on the driver's status (it remains on the last status that was set). |
Allow Switch from Off Duty to Driving |
(Applicable to HOS v2.x users only) Specify if the driver can manually change status from Off Duty to Driving. When set to "Off", this status change only occurs when the device detects movement. |
Show Sensor Failures |
(Applicable to HOS v2.x users only) Enable or disable the display of a sensor status message. When set to "On", a Sensor indicator is displayed in the lower right corner of the Hours of Service home screen. Following initialization, the background of this indicator text changes to reflect a pass/fail device sensor status (green background color for a pass, red background color if a fault is detected). Currently this check is for GPS quality/lock for vehicles not equipped with VaaH, or poor data quality for vehicles equipped with VaaH. |
Can Switch Ruleset |
(Applicable to HOS v2.x users only) Enable or disable the ability to switch the HOS rule set from within WorkPlan. If enabled, the driver can change the rule set defined in the setting Rule Type described above. |
Can Enable Oilfield |
(Applicable to HOS v2.x users only) Enable or disable the ability to turn oilfield options on or off from within WorkPlan. If enabled, the driver can override the setting HOS Oilfield described above. |
ELD Exempt Driver |
Select this check box for all drivers who are exempt from using an ELD; for example, mechanics who drive vehicles only for maintenance purposes. |
ELD Exempt Driver Reason |
If you have selected ELD Exempt Driver, you must provide a reason for the driver being exempt. |
Can Use CDL Short-Haul Exemption |
Enable or disable the ability to use the CDL short-haul exemption within WorkPlan. If enabled, the driver can enable or disable the CDL short-haul exemption, which applies different HOS rules, if drivers stay within a 150 air-mile radius of their depot. |
Can Use Non-CDL Short-Haul Exemption |
Enable or disable the ability to use the non-CDL short-haul exemption within WorkPlan. If enabled, the driver can enable or disable the non-CDL short-haul exemption, which applies different HOS rules, if drivers drive a vehicle that does not require a commercial drivers license, stay within a 150 air-mile radius of a specific location and return to that location after each shift. |
Can Use Personal Conveyance |
Enable or disable the ability to enter personal conveyance mode from within WorkPlan. If enabled, the driver can enter or leave personal conveyance mode, which stops tracking driver events while the driver uses the vehicle for personal trips. |
Can Use Yard Move |
Enable or disable the ability to enter yard move mode from within WorkPlan. If enabled, the driver can enter or leave yard move mode, which stops tracking driver events while the driver maneuvers the vehicle around the yard. |
Can Use Public Utility Exemption |
Enable or disable the ability to use the public utility exemption (or utility service vehicle exemption) within WorkPlan. If enabled, the driver can enable or disable the exemption in the app, which records the time working on public utility services as off-duty time. |
Can Use Unregulated Driving |
Enable or disable the ability to enter unregulated driving mode from within WorkPlan. If enabled, the driver can enter or leave unregulated driving mode, which means that driver events will not be tracked when they drive a vehicle that is not a commercial motor vehicle. |
Can Use General Exemption |
Enable or disable the ability to use the general exemption within WorkPlan. If this is enabled, you must provide a General Exemption Reason. If enabled, the driver can enable or disable the general exemption, which exempts them from complying with certain ELD regulations. This option is applicable only if you are using WorkPlan as an ELD, and is available only from the Edit Driver dialog box. |
General Exemption Reason |
The reason for this driver being exempt from certain ELD regulations. This must be provided if Can Use General Exemption is enabled. This option is applicable only if you are using WorkPlan as an ELD, and is available only from the Edit Driver dialog box. |
DVIR |
Enable or disable default support for driver vehicle inspection report. When set to "On", the DVIR menu option is available from the Home screen for this driver. |
Pre and Post Inspection |
Specifies if and when to display a DVIR to the driver. Available options are:
|
Max DVIR Forms to Save |
Specifies the maximum number of previously-submitted inspection reports that can be displayed on the driver's DVIR screen. The DVIR screen lists up to this number of the most recently submitted inspections. Available range is between 1 and 14, with a default of 5. |
Messaging |
Enable or disable default support for instant text messaging between this driver's mobile application and the server. |
Navigation |
Enable or disable default support for point-to-point mapping and navigation in this driver's application. When enabled, the Navigation menu option is available from the Home screen. See Navigation GE Settings for additional settings for Navigation GE. |
Coach |
Enable or disable default support for the Verizon Connect® Coach™ driver scorecard plug-in in this driver's account. When enabled, the Coach menu option is available from the Home screen. |
Realtime Coach |
Enable or disable support for real-time coach data. When enabled, the Coach application immediately alerts drivers of behavior that requires correction, potentially before these events are sent to the driver scorecard server. |
Show Driver Names on Leaderboard |
Enable or disable the display of driver names on the Verizon Connect® Coach™ leaderboard. When enabled, driver names are shown on the leaderboard table. When disabled, drivers remain anonymous. |
Trips |
Enable or disable support for the Trips app. This is a separate app that is not part of WorkPlan. It allows drivers to classify their trips as either personal or business. |
Comments
0 comments
Please sign in to leave a comment.